Samsung Galaxy S10e screen replacement in our technical service room how to do you can watch it through this video. We open the box of the phone. The screen was broken with a blow from the right side. We take the phone out of the box. The screen was broken with a heavy blow from the right middle part. We turn on the phone, there is no image. At the same time, the rear glass cover was broken. Now we are moving on to Samsung Galaxy S10e screen replacement stages. We remove the sim card slot. With hot air gun We heat the adhesive corners of the back cover. With the help of Pena we remove the back cover. Samsung Galaxy S10e back cover removal is complete. We unscrew the screws in the case. We removed a total of 15 screws. We remove the NFC and wireless charging part. We disassemble the part with speaker and network antennas. We disassemble the battery socket. We unscrew the motherboard connection sockets. We removed the front camera. We remove the headphone socket. We unscrew the screws on the motherboard. We removed 3 screws in total. We carefully remove the motherboard. Lets be careful. In one piece. We disassemble the vibration motor. We disassemble the battery. This is the Samsung Galaxy S10e screen. The new Samsung Galaxy S10e original screen. Display technology Dynamic AMOLED. It has 1080×2280 (FHD +) Pixel screen resolution. Screen durability Corning Gorilla Glass 5. Touch type capacitive screen. The screen-to-body ratio is 84.47%. Pixel density 438 PPI. Now we will attach all the parts we removed to the new screen. We will implement all the transactions in reverse. Samsung Galaxy S10e screen and back glass cover replacement It has been successfully realized. We open the phone. Thanks for watching.